m.microtech.engineering@gmail.com +91-9873945272, +91-7503973786
Twitter| Business Type | Manufacturer, Exporter, Supplier |
| Frequency | 50-60 Hz |
| Voltage | 240 V |
| Motor Power | 3 HP |
| Click to view more | |
Preferred Buyer From
| Location | Worldwide |
Product Details
Microtech Engineering Bottom Entry Mixers Are Typically Used In Conjunction With A Stirrer/Scraper Unit. It Emulsifies, Homogenizes, Solubilizes, Suspends, Disperses And Disintegrates Solids. The Bottom Gives High Shear Homogenization While The Stirrer/ Scraper Distribute The Homogenized Output Uniformly Throughout The Vessel. This Is Ideal For High-Viscosity Cosmetic, Pharmaceutical And Food Products. They Can Also Be Used On Low Viscosity Products To Wet Our Powders. Clean-In-Place Design With A Simple, Easy To Clean Construction.
Aeration Free
- Self-Pumping
- No Bypassing
- Interchangeable Warheads
- Sanitary Construction
- Easy Maintenance
- Lower Power Requirements
- Reduces Particle Size
- Rapidly Dissolves Solids
Accelerates Reactions
Sealing : Single Mechanical Shaft Sealing: A Single Carbon/Ceramic Mechanical Shaft Seal With Viton Elastomers Is Standard. Other Face Materials And Elastomers Are Available As Optional Extras. Double Mechanical Shaft Sealing: These Are Required When Processing Products That Are Abrasive, Sticky Or Viscous Or When The System Is Under Vacuum. Sealant Flushing Systems Can Be Supplied As Optional Extras :
- Operating Pressures - All Standard Models Are Designed For Operation On Pressures Not In Excess Of 40 Psig (2.8 Bar). High-Pressure Units Are Available Upon Request.
- Materials Of Construction - All Wetted Parts Are In 304/316 304L/316L Stainless Steel. Special Materials On Request. Electropolished Finish Is Available As An Optional Extra.
- Cleaning - Clean-In-Place (Cip) Design. Simple, Easy To Clean Construction.
- Motor Specifications - Tefc, Washdown Duty And Explosion Proof Motors Are Available As Standard. Inverter Rated, Stainless Steel And Other Motors Are Available As Optional Extras.
- Mounting - Stainless Steel Flange Fitting Is Available As Standard. Clamp-On Fitting Is Optional For Smaller Machines.
- Operating Pressures - All Standard Models Are Designed For Operation On Pressures Not In Excess Of 40 Psig (2.8 Bar). High-Pressure Units Are Available Upon Request.
- Ultra Sanitary: Model Available With Features Including:
- Crevice-Free Construction
- Sanitary Metal Bellows Shaft Seal
- Electro-polished Finish
